Description
20 A PWM controller — the same approach as the 10 A, with headroom for a larger array. Suits panels up to roughly 200-250 W on a 12 V system. Still PWM, so the same trade-off applies: simple and inexpensive, but it drags the panel down to battery voltage and discards the difference.
Key points
- 20 A charge and discharge — enough for a 200 W class array on 12 V.
- Lithium and lead-acid compatible — AGM, gel, flooded and LiFePO4.
- Consider MPPT at this size — around 200 W is where MPPT starts to earn its cost back, especially in cold, bright conditions. We would rather tell you that now.
- LCD display, USB output, IP30 — mount it somewhere with airflow.
Specifications
| Dimensions | 141 x 90 x 35 mm |
| Weight | 180g |
| Operating temperature | -40 °C to +70 °C |
| Load control | Control Button |
| Controller type | PWM |
| Supported battery types | Lithium, AGM, gel and flooded lead-acid |
| Max charging current | 20A |
| USB output | 5V/2.5A |
| Self-consumption | <12 mA |
| Display | LCD |
| Enclosure rating | IP30 |
| Case material | ABS |
| Heat dissipation | Concave-convex aluminium heat sink |
| Humidity | < 90% |
Best for
200 W class systems where budget matters more than squeezing out the last of the harvest.
Price on request. Send us the quantity and destination country and we will quote — request a quotation.
