Description
A 30 A PWM controller for mid-size lead-acid systems. PWM is the simple, inexpensive approach: it drags the panel down to battery voltage and discards the difference. At 30 A that is a meaningful amount of energy, so read the note below before choosing it over MPPT.
Key points
- Consider MPPT at this size. 30 A on 12 V means an array around 300-400 W, which is where an MPPT controller starts recovering enough extra energy to pay for itself — especially in cold, bright weather. We would rather say so than sell you the cheaper unit.
- Lithium and lead-acid compatible — AGM, gel, flooded and LiFePO4.
- LCD display and USB output (5 V / 2.5 A) for charging devices directly.
- IP30 enclosure — indoor mounting only, and it needs airflow. Do not bury it in a sealed locker.
Specifications
| Dimensions | 141 x 90 x 35 mm |
| Weight | 180g |
| Operating temperature | -40 °C to +70 °C |
| Load control | Control Button |
| Controller type | PWM |
| Supported battery types | Lithium, AGM, gel and flooded lead-acid |
| Max charging current | 30A |
| USB output | 5V/2.5A |
| Self-consumption | <12 mA |
| Display | LCD |
| Enclosure rating | IP30 |
| Case material | ABS |
| Heat dissipation | Concave-convex aluminium heat sink |
| Humidity | < 90% |
Best for
300-400 W systems where budget matters more than harvest. Above this size, MPPT is the better buy.
Price on request. Send us the quantity and destination country and we will quote — request a quotation.
