Installation Accessory Pack

Price on request

Screws, cable ties, sealant and small tools needed for a typical roof installation.

SKU: TE-AK-001
Category:
Request a quoteQuantity and destination country — we reply with a written quotation.

Description

Everything the installer needs that is not the panel, the controller or the cable — in one box. Assembled after watching too many installs stop halfway because nobody brought sealant, or the roof gland was the wrong size. It is not a margin product; it exists so the kit goes on in one visit.

Key points

  • Genuine 3M VHB tape, 19 mm × 2 m — the bonding tape flexible panels are actually designed to be fitted with. We specify the 3M original rather than a generic equivalent, because this is the joint holding a panel to a roof at motorway speed.
  • Neutral-cure silicone sealant for edge sealing. Neutral cure matters: acetic-cure sealant attacks aluminium and some coatings.
  • Two waterproof cable glands for the roof entry — the single most common leak point on a retrofit.
  • Stainless fastener set, M5–M6, 30 pieces with washers, plus 30 nylon cable ties.
  • Two pairs of MC4 connectors and 2 m of 6 mm² PV cable with terminals, for connection slack and for panel-to-panel links.
  • Hex key, screwdriver, marker and cleaning cloth — surface preparation before bonding is not optional, and the cloth is there so it actually happens.
  • Bilingual installation guide card (English and Chinese).

What is in the pack

Stainless screws, bolts and nutsM5–M6, 30 pieces with washers
Nylon cable ties30 pieces
MC4 connector pairs2 pairs (4 connectors)
3M VHB double-sided tape19 mm wide, 2 m, 3M original
Neutral-cure silicone sealant1 cartridge
Waterproof cable glands2 pieces
PV cable with terminals6 mm², 2 m
ToolsHex key and cross-head screwdriver
Installation guide cardEnglish and Chinese
Marker pen and cleaning clothFor surface preparation
Bill of materials as specified by us. A reduced version without the MC4 connectors and PV cable is available when the pack is bought alongside a cable kit — ask for the kit configuration.

Options

  • Kit configuration — without the MC4 connectors and PV cable, for customers already buying a TE-AKAC15-05 or TE-AKAC15-10 cable kit.
  • Neutral or own-brand packaging and a customised guide card on volume orders.

Best for

Dealers and converters who fit systems themselves, and distributors who want to raise kit basket value with something the customer genuinely needs.

Price on request. Send us the quantity and destination country and we will quote — request a quotation.